499 / 1002
SUSPENSION
33
5.7.7 REMOVAL AND INSTALLATION OF
LOWER ARM RUBBER BUSHES
A. Lower arm front pivot bush
Removal:
1. Remove front pivot bush using special tools as
shown in below arrangement.
FIG. 50
NOTE:
Apply soap and water to the bush, the
inner
surface of the tool and the bore of assembly
lower link before installation.
Installation:
1. Install front pivot arm bush using special tools
as shown in below arrangement.
FIG. 51
B. Lower arm rear pivot bush
Removal:
1. Remove Rear pivot bush using special tools
2702 5890 3218.
FIG. 52
NOTE:
Apply soap and water to the bush, the
inner
surface of the tool and the bore of assembly
lower link before installation.
Installation:
1. Install rear pivot arm bush using mallet.
FIG. 53