1165 / 1575
SAFARI STROME
SR
NO
DTC
DESCRIPTION RESOLVE
PRIORITY
EFFECT ON VEHCLE
CAUSES
CHECK POINTS
CORRECTIVE ACTION
CEL
MIL
STATUS
80
P1652
Malfunction
Indicator Lamp
(MIL) Control
Circuit.
L
1. No critical effect.
This DTC gets logged if the
MI lamp fault – OC.
1. Check instrument cluster.
2. Check electrical continuity
to MI lamp.
3. Check ECU.
1. Check if the bulb inside MI lamp is fuse
2. Check instrument cluster
3. Check electrical continuity between ECU pin 67
to Dashboard cluster connector as per circuit
schematic; follow electrical continuity check
procedure; Replace/rectify harness if required.
4. Check ECU; Replace ECU; if problem still
persists.
5. Confirmatory check after rectification. Check if
the MI lamp is coming on for 3 sec at the time of
ignition on for re-confirmation (before handing over
the vehicle).
N
N
81
P1651
Malfunction
Indicator Lamp
(MIL) Control
Circuit.
L
1. No critical effect.
This DTC gets logged if the
MI lamp fault - Short circuit
(SC) to Ground.
1. Check the connection of
sensors supplied by
Reference voltage 1 and
Reference voltage 2.
2. Check sensor connections
for rust dirt etc.
3. Check ECU.
1. Check instrument cluster
2. Check whether the EMS ecu pin 67 is short
circuited to ground. If so then rectify the wiring
harness connections.
3. Check ECU; Replace ECU; if problem still
persists.
4. Confirmatory check after rectification. Check if
the MI lamp is coming on for 3 sec at the time of
ignition on for re-confirmation (before handing over
the vehicle).
Y
N
82
P1650
Malfunction
Indicator Lamp
(MIL) Control
Circuit.
L
1. No critical effect.
This DTC gets logged if the
MI lamp fault - SC to
supply.
1. Check instrument cluster.
2. Check electrical continuity.
3. Check ECU.
1. Check instrument cluster
2.Check whether the EMS ecu pin 67 is short
circuited to battery. If so then rectify the wiring
harness connections.
3. Check ECU; Replace ECU; if problem still
persists. Confirmatory check after rectification
4. Check if the CE lamp is coming on for 3 sec at
the time of ignition on for re-confirmation (before
handing over the vehicle).
83
P0650
Malfunction
Indicator Lamp
(MIL) Control
Circuit.
No critical effect.
MI lamp fault.
1. Check instrument cluster.
2. Check electrical continuity
to MI lamp.
3. Check ECU.
1. Follow electrical continuity check procedure.
Replace/rectify harness if required.
2. Replace ECU; if problem still persists.
N
N
84
P0685
ECM/PCM
Power Relay
Control
Circuit/Open.
M
1. Engine will not start
2. Cannot communicate with the ECU.
This DTC gets logged if the
ECU main power supply
relay gets stuck.
1. Check the connection of
the supply relay.
2. Check sensor connections
for rust dirt etc.
3. Check ECU.
1. Check the connection of the supply relay and
rectify if any wrong connections are found; if relay is
not functioning; Replace relay.
2. Check connector for rust dirt etc.; Follow
rectification process of concerned sensor if faulty.
3. Check ECU; Replace ECU; if problem still
persists.
N
N