1169 / 1575
SAFARI STROME
SR
NO
DTC
DESCRIPTION RESOLVE
PRIORITY
EFFECT ON VEHCLE
CAUSES
CHECK POINTS
CORRECTIVE ACTION
CEL
MIL
STATUS
95
P1105
Atmospheric
Pressure sensor
supply – Vext.
No critical effect.
Atmospheric Pressure
sensor supply - reference
voltage fault.
1. Check wiring harness.
2. Check atmospheric
pressure value and compare
with the actual pressure at
the location.
1. Rectify wiring harness.
2. Replace the ECU.
N
Y
96
P1107
Atmospheric
pressure signal
– generic.
L
1. Probable loss of power and black smoke
2. EGR Is Disabled
3. MIL is OFF.
This DTC Atmospheric
pressure sensor - generic
gets logged due to faults
raised on atmospheric
sensor (e.g. SC; OC;
gradient faults etc.).
1. Check atmospheric
pressure value and compare
with the actual pressure at
the location.
1. Check any damage of atmospheric pressure
sensor present in the ECU.
2. Check for atmospheric pressure value read from
ECU and compare it with the actual atmospheric
pressure at the location.
3. If the pressure at the location and pressure
measured by the ECU is not matching; replace the
ECU.
4. Confirmatory check after rectification ensures the
following before handing over to customer.
a) Atmospheric pressure value reads by the ECU
is = Boost pressure at ignition key is on.
b) Atmospheric pressure value reads by the ECU
is > Boost pressure when the engine is at idle.
c) Atmospheric pressure value reads by the ECU
is < Boost pressure when the engine is at fly-up.
N
N
97
P1110
Air Temperature
sensor supply –
vext.
No critical effect
AMF air temperature
sensor supply - reference
voltage fault.
1. Check for Reference
voltage1 fault or If P1100 is
present.
2. Check sensor connections
for rust dirt etc.
3. Check sensor
characteristics (measure
voltage and resistance at
sensor terminals).
4. Check Electrical continuity.
5. Check ECU.
1. Follow Reference voltage 1 check and
rectification Procedure.
2. Clean the sensor connections and ensure proper
fitment.
3. Sensor voltage should be 5 V and resistance as
given is specifications. Replace sensor if found
faulty.
4. Follow Electrical continuity check procedure.
Replace/ Rectify Harness if required.
5. Replace ECU; if problem still persists.
N
Y
98
P1115
Coolant
temperature
sensor supply –
vext
No critical effect.
Coolant temperature
sensor supply - reference
voltage fault.
1. Check for Reference
voltage 1 fault or If P1105 is
present.
2. Check sensor connections
for rust dirt etc.
3. Check sensor
characteristics (measure
voltage and resistance at
sensor terminals).
4. Check Electrical continuity.
5. Check ECU.
1. Follow Reference voltage 1 check and
rectification Procedure.
2. Clean the sensor connections and ensure proper
fitment.
3. Sensor voltage should be 5 V and resistance as
given is specifications. Replace sensor if found
faulty.
4. Follow Electrical continuity check procedure.
Replace/ Rectify Harness if required.
5. Replace ECU; if problem still persists.
N
Y