SAFARI STROME
SR
NO
DTC
DESCRIPTION RESOLVE
PRIORITY
EFFECT ON VEHCLE
CAUSES
CHECK POINTS
CORRECTIVE ACTION
CEL
MIL
STATUS
88
P0692
Fan 1 Control
Circuit High.
M
1. AC is not functioning – AC Off.
2. Radiator fan will not run.
3. MIL is ON.
4. Reduced Torque active.
This DTC gets logged due
to Low speed fan (Top fan)
control is short circuit to
battery positive.
1. Check the fan control relay
connection.
2. Check electrical continuity.
3. Check ECU.
1. Check the fan control relay connection; Perform
necessary repairs if connection is faulty.
2. Check electrical continuity between ECU pin 66
to Relay connector as per circuit schematic;
Replace relay if problem persists. And perform
actuator test. Check whether the ecu pin 66 is short
circuit to battery. If so then rectify the wiring
harness connections.
3. Check ECU; Replace ECU; if problem persists.
4. Confirmatory check after rectification Perform
Actuator test for fan and visually check that fan is
operating. Also ensure radiator fan is rotating is
right direction.
Y
N
89
P0693
Fan 2 Control
Circuit Low.
M
1. AC is not functioning – AC Off.
2. Radiator fan will remain on continuously.
3. MIL is ON.
4. Reduced Torque active.
This DTC gets logged due
to (Bottom) High speed fan
is short circuited to ground.
1. Check the fan control relay
connection.
2. Check electrical continuity.
3. Check ECU.
1. Check the fan control relay connection; Perform
necessary repairs if connection is faulty.
2. Check electrical continuity between ECU pin 47
to Relay connector as per circuit schematic;
Replace relay if problem persists. And perform
actuator test check whether the ecu pin 47 is short
circuit to ground. If so then rectify he wiring harness
connections.
3. Check ECU; Replace ECU; if problem persists.
4. Confirmatory check after rectification Perform
Actuator test for fan and visually check that fan is
operating. Also ensure radiator fan is rotating is
right direction.
Y
N
90
P0694
Fan 2 Control
Circuit High.
M
1. AC is not functioning – AC Off.
2. Radiator fan will not run.
3. MIL is ON.
4. Reduced Torque active.
This DTC gets logged due
to Bottom fan is short
circuited to battery positive.
1. Check the fan control relay
connection.
2. Check electrical continuity.
3. Check ECU.
1. Check the fan control relay connection; Perform
necessary repairs if connection is faulty.
2. Check electrical continuity between ECU pin 47
to Relay connector as per circuit schematic;
Replace relay if problem persists. And perform
actuator test check whether the ecu pin 47 is short
circuit to battery. If so then rectify he wiring harness
connections.
3. Check ECU; Replace ECU; if problem persists.
4. Confirmatory check after rectification Perform
Actuator test for fan and visually checks that fan is
operating. Also ensure radiator fan is rotating is
right direction.
Y
N
91
P0698
Sensor
Reference
Voltage “C”
Circuit Low.
No critical effect.
2.5V sensor Supply 2Aux
fault – High.
1. Check the connection of
sensors supplied by
Reference voltage1 and
Reference voltage2.
2. Check sensor connections
for rust dirt etc.
3. Check ECU.
1. Follow Vext1 and Vext2 check /rectification
process.
2. Follow rectification process of concerned sensor
if faulty.
3. Replace ECU; if problem still persists.
N
N




