1171 / 1575
SAFARI STROME
SR
NO
DTC
DESCRIPTION RESOLVE
PRIORITY
EFFECT ON VEHCLE
CAUSES
CHECK POINTS
CORRECTIVE ACTION
CEL
MIL
STATUS
104
P1173
Minimum Drive
Pulse too short
(Cylinder 3).
M
1. Engine may have abnormal noise and
vibrations.
2. Disables Pilot Injection.
3. Check for cylinder 3 Injector.
4. MIL is OFF.
5. Injector learning strategy is deactivated;
MDP Updating is deactivated.
This DTC gets logged if the
Cylinder 3 Injector
correction values are less
than the minimum value.
1. Check whether I2C values
are entered in ECU.
2. Check whether I2C
entered in ECU matches with
sticker on injectors.
1. Check whether I3C values (20 digit alpha
numeric number printed on the injector) are entered
in ECU; if not enter I3C values correctly and Erase
the fault.
2. Check whether I3C entered in ECU matches with
sticker on injectors; if problem persists replace
injectors; enter I3C values and erase faults.
3. If problem still persists replace ECU.
Y
N
105
P1174
Minimum Drive
Pulse too short
(Cylinder 4).
M
1. Engine may have abnormal noise and
vibrations.
2. Disables Pilot Injection.
3. Check for cylinder 4 Injector.
4. MIL is OFF.
5. Injector learning strategy is deactivated;
MDP Updating is deactivated.
This DTC gets logged if the
Cylinder 4 Injector
correction values are less
than the minimum value.
1. Check whether I2C values
are entered in ECU.
2. Check whether I2C
entered in ECU matches with
sticker on injectors.
1. Check whether I3C values (20 digit alpha
numeric number printed on the injector) are entered
in ECU; if not enter I3C values correctly and Erase
the fault.
2. Check whether I3C entered in ECU matches with
sticker on injectors; if problem persists replace
injectors; enter I3C values and erase faults.
3. If problem still persists replace ECU.
Y
N
106
P029C
INSUFFICIENT
NO OF
UPDATES IN
ZONE 0.
M
1. Engine may have abnormal noise and
vibrations.
2. Check for cylinder 3 Injector.
3. MIL is OFF.
4. Look for fault in SPC disabled group.
This DTC is logged when
1st cylinder injector
learning does not happen
for 3000 km.
Check and confirm I3C
values in ECU.
1) Check I3C value is correctly fed in the ECU (by
comparing the I3C values written on the injectors
against I3C values visible in the diagnostics tool) if
not feed the correct I3C values in the ECU.
2) Re-write the I3C values in the ECU even if it's
correct.
3) Check correct clutch switch setting. (Follow
clutch switch checking procedure given in checking
procedure under system data).
4) Check for presence of any of the P-codes (with
current status) in ECU memory and rectify before
proceeding further.
5) Do injector learning as per the defined
procedure.
Y
N
107
P02A4
INSUFFICIENT
NO OF
UPDATES IN
ZONE 1.
M
1. Engine may have abnormal noise and
vibrations.
2. Check for cylinder 3 Injector.
3. MIL is OFF.
4. Look for fault in SPC disabled group.
This DTC is logged when
3rd cylinder injector
learning does not happen
for 3000 km.
Check and confirm I3C
values in ECU.
1) Check I3C value is correctly fed in the ECU (by
comparing the I3C values written on the injectors
against I3C values visible in the diagnostics tool) if
not feed the correct I3C values in the ECU.
2) Re-write the I3C values in the ECU even if it's
correct.
3) Check correct clutch switch setting. (Follow
clutch switch checking procedure given in checking
procedure under system data).
4) Check for presence of any of the P-codes (with
current status) in ECU memory and rectify before
proceeding further.
5) Do injector learning as per the defined
procedure.
Y
N