ARIA

CLUTCH

PRECAUTIONS

! CAUTION

•

Do not reuse the concentric slave cylinder and

clutch master cylinder mounting bolts.

•

Bleed the system only after complete

installation of hydraulic system and assembly of

clutch and flywheel.

•

Fluid drained from the system should be

discarded.

•

Any fallen and damaged parts should not be

reused.

•

Use of mineral oil in the vicinity of clutch

release system components should be avoided.

A. CLUTCH MASTER CYLINDER

REMOVAL

1. Disconnect the battery connections

2. Remove the stone guard and drain the clutch

fluid from the hydraulic adapter.

(For procedure

refer clutch fluid draining procedure in this

section.)

3. Pull out the clip using a screw driver and

disconnect the high pressure line from clutch

master cylinder by pulling it out.

NOTE

After disconnecting the high pressure line, plug the

CMC opening with suitable cap to avoid entry of

any contaminants.