946 / 1428
TRANSAXLE (NANO AMT)
85
7. Loosen and remove the 9 no’s of bolts on the
rear cover of transaxle.
8. Remove the dowel pin of the shifter fork (5
th
speed) by slightly hammering from opposite
side with suitable tool.
9. Lock input shaft by adaptor 270258902611.
10. Unstake and unscrew the locknuts of lay shaft
and input shaft.
NOTE:
Before removing lock nuts make sure the
gear is engaged position.
11. Remove engaging gear (5th speed) along
with sleeve and fork taking care that carrier
assembly does not slip off.
12. Remove the fifth gear from the lay shaft.
13. Remove needle bearing.