847 / 1906
TRANSMISSION
32
22. Connect the speed sensor on converter
housing.
NOTE:
Do not touch the connector pins.
23. Install the vent tube system and tighten the
screws to 0.9~1Kgfm.
24. Reconnect the rubber tube on the
transmission breather.
25. Install the crossbar and tighten the 6 screws
to 8.6kgfm tightening torque.
26. Tighten the two crossbar nuts to 4 kg-m.
27. Tighten the two rear mount nuts to 4 kg-m.
28. Place new O-rings on the cooler lines.