HEXA

TRANSMISSION

14. Push Transmission by hand against the flex

plate.

15. Turn the crank pulley using a H19 wrench

CLOCKWISE ONLY until the torque converter

bolt hole is aligned with the flex plate bolt

hole.

16. Install and Hand tighten 6 new screws.

NOTE:

Torque converter bolts are self-locking and must

be replaced with new torque converter bolts

every time the bolts are removed.

17. Tighten the screws to 6 to 6.5Kgfm.

NOTE:

Do not tighten before the 6 screws are in

position.

18. Install the starter motor cover.

19. Control the starter motor dowel pin. If bend or

damaged, replace it.

20. Install the starter motor.

21. Tighten the 3 starter motor screws to 3kgfm

tightening torque.