NANO

538

BRAKE SYSTEM

CAUTION:

1. Discard all used rubber parts. Never use any

mineral oil base fluids like Kerosene, Diesel, Petrol,

Thinner etc. for cleaning of the Brake Aggregates

and their child parts.

2. Ensure visually that the inlet ports (compensatory

ports and inlet ports) are clear. Do not poke these

holes with sharp objects. Clean them only with dry

compressed air.

9. Remove the Secondary PistonAssembly (10) by

tapping the TMC at flange, gently on a wooden

block.

10. Clean the Master Cylinder body and internal parts

with fresh brake fluid and ensure these parts are

kept in a clean tray or on a clean sheet of paper.

3. If contamination is observed on the removed seals

(Normally they would have swollen and can be

compared with new seals from the kit, which will

show clearly that the size is enlarged). The entire

rubber parts in the system including both front

and rear hoses must be discarded and the entire

system should be flushed with fresh brake fluid.