SAFARI STROME
SR
NO
DTC
DESCRIPTION RESOLVE
PRIORITY
EFFECT ON VEHCLE
CAUSES
CHECK POINTS
CORRECTIVE ACTION
CEL
MIL
STATUS
164
P1616
ECU nonvolatile
memory fault.
H
1. No recovery action.
This DTC gets logged due
to Nonvolatile memory fault
corresponds to watch dog
function (WDOG).
1. Check the ECU Earth.
(Check star washer; check
whether the earthling is not
fully covered by Body paint).
2. Check I2C values.
3. Check ECU.
1. Check the ECU Earth. (Check star washer;
check whether the earthling is not fully covered by
Body paint); Ensure proper earthling.
2. Check I2C values; enter correct I2C values
(match them with the sticker on the injector).
3. Check ECU; Replace ECU; if problem still
persists.
Y
N
165
P1606
ECU nonvolatile
memory fault.
H
1. No recovery action.
Non Volatile memory - Can
or KW [ECU nonvolatile
memory fault] - CAN / KWP
fault. This DTC gets logged
due to ATC; PL CC and PL
CDS.
1. Check the ECU Earth.
(Check star washer; check
whether the earthling is not
fully covered by Body paint).
2. Check ECU.
1. Check the ECU Earth. (Check star washer; check
whether the earthling is not fully covered by Body
paint); Ensure proper earthling.
2. Check and replace ECU; if problem still persists.
Y
N
166
P1607
ECU watchdog
fault.
Erratic engine behavior.
Watchdog - Injector
shutdown impossible.
1. Check the ECU Earth.
(Check star washer; check
whether the earthling is not
fully covered by Body paint).
2. Check ECU.
1. Check the ECU Earth. (Check star washer; check
whether the earthling is not fully covered by Body
paint).
2. Check ECU.
Y
N
167
P1608
ECU watchdog
fault.
Erratic engine behavior.
Watchdog - Injector unlock
during startup.
1. Check the ECU Earth.
(Check star washer; check
whether the earthling is not
fully covered by Body paint).
2. Check ECU.
1. Check the ECU Earth. (Check star washer; check
whether the earthling is not fully covered by Body
paint).
2. Check ECU.
Y
N
168
P1617
ECU nonvolatile
memory fault.
H
1. No recovery action.
This DTC gets logged due
to Nonvolatile memory fault
corresponds to System
mode control (SMC).
1. Check the ECU Earth.
(Check star washer; check
whether the earthling is not
fully covered by Body paint).
2. Check I2C values.
3. Check ECU.
1. Check the ECU Earth. (Check star washer; check
whether the earthling is not fully covered by Body
paint); Ensure proper earthling.
2. Check I2C values; enter correct I2C values
(match them with the sticker on the injector).
3. Check ECU; Replace ECU; if problem still
persists.
Y
N
169
P1618
Cylinder 1-4
injector HSD.
Erratic engine behavior.
Cylinder 1-4 injector HSD.
1. Check the injector
connections.
2. Disconnect injector
connection after key off and
read faults after key on.
3. Ignition off connect
another injector and key on
the ignition. Check for faults.
4. Check ECU.
1. Repair/ replace connectors.
2. Replace injectors if faulty.
3. Replace ECU if problem persists.
Y
N




