SAFARI STORME

1187 / 1575

SAFARI STROME
SR
NO DTC DESCRIPTION RESOLVEPRIORITY EFFECT ON VEHCLE CAUSES CHECK POINTS CORRECTIVE ACTION CEL MIL
STATUS
139 P1291
Injector wiring
resistance too
high - 4th
Injector.
M
1. Engine may have abnormal noise and
vibrations.
2. Injector pulse correction for wiring
harness resistance is disabled.
3. RVD is disabled.
4. IMV operates in stable condition.
This DTC gets logged; if
wiring harness resistance
of 4th Injector exceeds the
upper threshold.
1. Check injector connector.
2. Check Injector.
3. Check ECU.
1. Check injector connector; Key off ignition and
wait for 10 seconds. Disconnect the injector clean
and reconnect properly. Check if problem vanishes.
2. Check Injector; if problem persists follow injector
checks and rectification procedure (please provide
injector resistance value at room temperature for
Checking injector).
3. Replace wiring harness if problem persists.
4. Replace injector if problem persists.
5. Replace ECU if required.
Y N
140 P1290
Wiring harness
resistance too
low - 4th
injector.
M
1. Engine may have abnormal noise and
vibrations.
2. Injector pulse correction for wiring
harness resistance is disabled.
3. RVD is disabled.
4. IMV operates in stable condition.
This DTC gets logged; if
wiring harness resistance
of 4th Injector goes bellow
the lower threshold.
1. Check injector connector.
2. Check Injector.
3. Check ECU.
1. Check injector connector; Key off ignition and
wait for 10 seconds. Disconnect the injector clean
and reconnect properly. Check if problem vanishes.
2. Check Injector; if problem persists follow injector
checks and rectification procedure.(please provide
injector resistance value at room temperature for
Checking injector).
3. Replace wiring harness if problem persists.
4. Replace injector if problem persists.
5. Replace ECU if required.
Y N
141 P1293
Injector wiring
resistance too
high - 3rd
injector.
M
1. Engine may have abnormal noise and
vibrations.
2. Injector pulse correction for wiring
harness resistance is disabled.
3. RVD is disabled.
4. IMV operates in stable condition.
This DTC gets logged; if
wiring harness resistance
of 3rd Injector exceeds the
upper threshold.
1. Check injector connector.
2. Check Injector.
3. Check ECU.
1. Check injector connector; Key off ignition and
wait for 10 seconds. Disconnect the injector clean
and reconnect properly. Check if problem vanishes.
2. Check Injector; if problem persist follow injector
checks and rectification procedure (please provide
injector resistance value at room temperature for
Checking injector).
3. Replace wiring harness if problem persists.
4. Replace injector if problem persists.
5. Replace ECU if required.
Y N
142 P1292
Wiring harness
resistance too
low - 3rd
injector.
M
1. Engine may have abnormal noise and
vibrations.
2. Injector pulse correction for wiring
harness resistance is disabled.
3. RVD is disabled.
4. IMV operates in stable condition.
This DTC gets logged; if
wiring harness resistance
of 3rd Injector goes bellow
the lower threshold.
1. Check injector connector.
2. Check Injector.
3. Check ECU.
1. Check injector connector; Key off ignition and
wait for 10 seconds. Disconnect the injector clean
and reconnect properly. Check if problem vanishes.
2. Check Injector; if problem persist follow injector
checks and rectification procedure (please provide
injector resistance value at room temperature for
Checking injector).
3. Replace wiring harness if problem persists.
4. Replace injector if problem persists.
5. Replace ECU if required.
Y N