1191 / 1575
SAFARI STROME
SR
NO
DTC
DESCRIPTION RESOLVE
PRIORITY
EFFECT ON VEHCLE
CAUSES
CHECK POINTS
CORRECTIVE ACTION
CEL
MIL
STATUS
160
P268F
Nonvolatile
memory - I2C.
M
Engine idle speed remains high.
This DTC gets logged due
to I3C value for the
Cylinder 4 Injector is not
written on the ECU.
1. Cross check I3C values of
Injector 4 (20 digit alpha
numeric value printed on the
injector) against I3C value
feed fed in the ECU.
2. If these two values don't
match then; feed the correct
I3C values (20 digit alpha
numeric value printed on the
injector) of injector 4 in the
ECU.
3. Key off and wait for 30 sec
and key on; check for
reappearance of the DTC.
4. If problem keeps repeating
change the ECU.
1. Cross check I3C values of Injector 4 (20 digit
alpha numeric value printed on the injector) against
I3C value feed fed in the ECU.
2. If these two values don't match then; feed the
correct I3C values (20 digit alpha numeric value
printed on the injector) of injector 4 in the ECU.
3. Key off and wait for 30 sec and key on; check for
reappearance of the DTC.
4. If problem keeps repeating change the ECU.
Y
N
161
P268D
Nonvolatile
memory - I2C.
M
Engine idle speed remains high.
This DTC gets logged due
to I3C value for the
Cylinder 2 Injector is not
written on the ECU.
1. Cross check I3C values of
Injector 2 (20 digit alpha
numeric value printed on the
injector) against I3C value
feed fed in the ECU.
2. If these two values don't
match then; feed the correct
I3C values (20 digit alpha
numeric value printed on the
injector) of injector 2 in the
ECU.
3. Key off and wait for 30 sec
and key on; check for
reappearance of the DTC.
4. If problem keeps repeating
change the ECU.
1. Cross check I3C values of Injector 2 (20 digit
alpha numeric value printed on the injector) against
I3C value feed fed in the ECU.
2. If these two values don't match then; feed the
correct I3C values (20 digit alpha numeric value
printed on the injector) of injector 2 in the ECU.
3. Key off and wait for 30 sec and key on; check for
reappearance of the DTC.
4. If problem keeps repeating change the ECU.
Y
N
162
P1614
ECU nonvolatile
memory fault.
H
1. No recovery action.
This DTC gets logged due
to Nonvolatile memory fault
corresponds to C2I and
MDP.
1. Check the ECU Earth.
(Check star washer; check
whether the earthling is not
fully covered by Body paint).
2. Check I2C values.
3. Check ECU.
1. Check the ECU Earth. (Check star washer; check
whether the earthling is not fully covered by Body
paint); Ensure proper earthling.
2. Check I2C values; enter correct I2C values
(match them with the sticker on the injector).
3. Check ECU; Replace ECU; if problem still
persists.
Y
N
163
P1615
ECU nonvolatile
memory fault.
H
1. No recovery action.
This DTC gets logged due
to Nonvolatile memory fault
corresponds to Physical
layer etc.
1. Check the ECU Earth.
(Check star washer; check
whether the earthling is not
fully covered by Body paint)
2. Check I2C values.
3. Check ECU.
1. Check the ECU Earth. (Check star washer; check
whether the earthling is not fully covered by Body
paint); Ensure proper earthling.
2. Check I2C values; enter correct I2C values
(match them with the sticker on the injector).
3. Check ECU; Replace ECU; if problem still
persists.
Y
N