SAFARI STORME

1190 / 1575

SAFARI STROME
SR
NO DTC DESCRIPTION RESOLVEPRIORITY EFFECT ON VEHCLE CAUSES CHECK POINTS CORRECTIVE ACTION CEL MIL
STATUS
155 P1603 ECU memory
integrity fault. H
1. Engine will stop.
2. Injector learning strategy is calculation is
disabled.
This DTC gets logged due
to ECU Code integrity.
1. Check the ECU Earth.
(Check star washer; check
whether the earthling is not
fully covered by Body paint).
2. Check ECU.
1. Check the ECU Earth. (Check star washer; check
whether the earthling is not fully covered by Body
paint); Ensure proper earthling.
2. Check and replace ECU; if problem still persists.
Y N
156 P1604 ECU memory
integrity fault. H
1. Engine will stop.
2. Injector learning strategy is calculation is
disabled.
This DTC gets logged due
to ECU Cal integrity.
1. Check the ECU Earth.
(Check star washer; check
whether the earthling is not
fully covered by Body paint).
2. Check ECU.
1. Check the ECU Earth. (Check star washer; check
whether the earthling is not fully covered by Body
paint); Ensure proper earthling.
2. Check and replace ECU; if problem still persists.
Y N
157 P1605 ECU memory
integrity fault. H
1. Engine will stop.
2. Injector learning strategy is calculation is
disabled.
This DTC gets logged due
to ECU RAM integrity.
1. Check the ECU Earth.
(Check star washer; check
whether the earthling is not
fully covered by Body paint).
2. Check ECU.
1. Check the ECU Earth. (Check star washer; check
whether the earthling is not fully covered by Body
paint); Ensure proper earthling.
2. Check and replace ECU; if problem still persists.
Y N
158 P268C
Nonvolatile
memory - I2C. M Engine idle speed remains high.
This DTC gets logged due
to I3C value for the
Cylinder 1 Injector is not
written on the ECU.
1. Cross check I3C values of
Injector 1 (20 digit alpha
numeric value printed on the
injector) against I3C value
feed fed in the ECU.
2. If these two values don't
match then; feed the correct
I3C values (20 digit alpha
numeric value printed on the
injector) of injector 1 in the
ECU.
3. Key off and wait for 30 sec
and key on; check for
reappearance of the DTC.
4. If problem keeps repeating
change the ECU.
1. Cross check I3C values of Injector 1 (20 digit
alpha numeric value printed on the injector) against
I3C value feed fed in the ECU.
2. If these two values don't match then; feed the
correct I3C values (20 digit alpha numeric value
printed on the injector) of injector 1 in the ECU.
3. Key off and wait for 30 sec and key on; check for
reappearance of the DTC.
4. If problem keeps repeating change the ECU.
Y N
159 P268E Nonvolatile
memory - I2C. M Engine idle speed remains high.
This DTC gets logged due
to I3C value for the
Cylinder 3 Injector is not
written on the ECU.
1. Cross check I3C values of
Injector 3 (20 digit alpha
numeric value printed on the
injector) against I3C value
feed fed in the ECU.
2. if these two values don't
match then; feed the correct
I3C values (20 digit alpha
numeric value printed on the
injector) of injector 3 in the
ECU.
3. Key off and wait for 30 sec
and key on; check for
reappearance of the DTC.
4. If problem keeps repeating
change the ECU.
1. Cross check I3C values of Injector 3 (20 digit
alpha numeric value printed on the injector) against
I3C value feed fed in the ECU.
2. If these two values don't match then; feed the
correct I3C values (20 digit alpha numeric value
printed on the injector) of injector 3 in the ECU.
3. Key off and wait for 30 sec and key on; check for
reappearance of the DTC.
4. If problem keeps repeating change the ECU.
Y N