2488 / 4910
Vehicle Platform: OSPREY
ECU Name: Hella Body Control Module (BCM) DTC
Troubleshooting Data
Version: 1.4
Date: 15 May 2018
Author: Body CoC
Page: 408 of 855
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B160F - 12: Driver Door Lock Signal - Circuit short to Battery or Open Circuit
Overview:
ISO Code
B160F - 12
Customer Symptom
No locking action happened on operating the vehicle
lock.
Fault Effects (On Vehicle)
Driver's door will not lock
Lamp Status (If Any)
NA
Fault Detection Condition
This fault will be logged after the input switch test
routine execution. User has to operate the switch
manually during routine. If short to battery or open
circuit fault is detected for Driver Door Lock Signal, then
this DTC code will be returned with the routine results.
Normal Operating Condition
There should not be any fault returned by routine
Probable Trouble Area
1. BCM connector Fault
2. Right side wiring harness Short to battery or
open circuit
3. Actuator is damaged or stuck or faulty
4. BCM ECU fault
Healing Condition
1. Ignition OFF
ON
2. Clear DTC Command
Component Details:
Driver Door Actuator, BCM connector
Functionality:
If the Driver door Actuator is short to Battery or Open Circuit, then the Driver's door will not lock.
Preliminary Checks:
1. Check Battery Voltage (12.5 V & above)
2. Check ECU pins for oxidation, bending & damage.
Trouble Shooting: