2485 / 4910
Vehicle Platform: OSPREY
ECU Name: Hella Body Control Module (BCM) DTC
Troubleshooting Data
Version: 1.4
Date: 15 May 2018
Author: Body CoC
Page: 405 of 855
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B160F - 11: Driver Door Lock Signal - Circuit Short to Ground
Overview:
ISO Code (DTC Code)
B160F - 11
Customer Symptom
No Unlocking action happened on operating the vehicle
unlock.
Fault Effects (On Vehicle)
Driver's door locks and will not unlock
Lamp Status (If Any)
NA
Fault Detection Condition
This fault will be logged after the input switch test
routine execution. User has to operate the switch
manually during routine. If short to ground fault is
detected for Driver Door Lock Signal, then this DTC
code will be returned with the Routine results.
Normal Operating Condition
There should not be any fault returned by routine
Probable Trouble Area
1. BCM connector Fault
2. Right side wiring harness short to ground
3. Actuator is damaged or stuck or faulty
4. BCM ECU fault
Healing Condition
1. Ignition OFF
ON
2. Clear DTC Command
Component Details:
Driver Door Actuator, BCM connector
Functionality:
If the Driver door Actuator is Short to Ground, then the Driver door is in lock state.
If the Driver door Actuator is locked, then BCM shall receive the feedback of Driver door as Lock status.
Preliminary Checks:
1. Check Battery Voltage (9V-16V)
2. Check ECU pins for oxidation, bending & damage.
Trouble Shooting: