2351 / 4910
Vehicle Platform: OSPREY
ECU Name: Hella Body Control Module (BCM) DTC
Troubleshooting Data
Version: 1.4
Date: 15 May 2018
Author: Body CoC
Page: 271 of 855
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B222E - 12: Main Beam Switch - Circuit short to Battery or Open Circuit
Overview:
ISO Code
B222E - 12
Customer Symptom
Main beam always OFF
Fault Effects (On Vehicle)
Main beam always OFF
Lamp Status (If Any)
Always OFF
Fault Detection Condition
This fault will be logged after the input switch test
routine execution. User has to operate the switch
manually during routine. If short to battery or open
circuit fault is detected for main beam switch then this
DTC code will be returned with the Routine results.
Normal Operating Condition
There should not be any fault returned by routine
Probable Trouble Area
1. BCM connector Fault
2. Main beam switch input Short to battery or open
circuit from cockpit wiring harness
3. Switch damaged or stuck
4. Combi switch connector fault.
5. BCM ECU fault
Healing Condition
1. Ignition OFF
ON
2. Clear DTC Command
Component Details:
Main beam switch is part of combination stalk switch and interfaced to the BCM. If the IGN is on and
headlamps are ON and if user put the combi switch to main beam position, high beams will turn ON.
Preliminary Checks:
1. Check Battery Voltage (12.5 V & above)
2. Check ECU pins for oxidation, bending & damage.
Trouble Shooting:-