TIAGO

1.2L REVOTRON ENGINE

Alternative method for flushing operation for

cleaning the catalytic converter is by directing dry

compressed air draft (3 to 4 bar) in the direction of

catalytic converter inlet, after removing it from the

vehicle.

AVOID



Push start or tow-starting the vehicle.

(Use jump

leads).



Long

(not more than 10 seconds)

repeat

(not

more than 3 times)

starting of the vehicle.

Investigate the cause for difficulty in starting

and rectify the same.



Long idling

(to warm-up)

if the engine is running

rough, after a cold start.



Switching “OFF” the ignition when driving down

the hill.



Fuel almost empty.



Pre- Coating/Painting of Catalytic Converter

WARNING



Avoid parking of vehicle over inflammable

materials, such as dry leaves; grass etc. as

exhaust system is hot enough to initiate fire.

CAUTION



Ensure exhaust system and catalytic

converter is not blocked and is free from

obstruction.



Blockages in the exhaust can create back

pressure, low top speed, poor pick up, black

smoke, carbon build up and low mileage.



Excessive carbon build-up / sticky valve.



Damaged vacuum lines.



The Catalytic converter should not be dropped

from a height. If dropped, it should not be used.

CAUTION



The Catalytic converter should not be

dropped from a height. If dropped, it should

not be used.



MAIN SILENCER

REMOVAL

1. Loosen and remove the bolt of clamp and

disconnect the two pipe assembly along with

the main silencer from Intermediate pipe.

2. Remove the two rubber hanger from spare

wheel side and one from silencer end.

3. Take out the main silencer assembly.

FITMENT

For fitment follow the reverse procedure of

removal.