NANO

768

BODY

HOODSETTINGPROCEDURE

Whenever hood does not close or opens properly, it

needs to adjust which is as follows:

1. Loosen hood mounting screws and hood striker

screws and align the hood so that hood opens

and closes properly. Then tighten the screws at

this position.

HOOD STRIKER

Removal

NOTE:

Before removing mounting screws of hood striker, do

the markings on striker so that while refitting, the

alignment of the hood will not change.

1. Remove two screws and take out the hood striker.

Installation

1. Align hood striker with the markings and tighten

two screws.