NANO

766

BODY

Installation

1. Apply the recommended grease to the sliding

plates and cable.

2. Engage the latch cable in the groove of the latch

3. Align the latch with the markings and tighten two

bolts to specified torque.

TIGHTENING TORQUE FOR LATCH BOLTS = 1 Kg-m

NOTE :

Check proper functioning of hood by opening and

closing the hood. If hood doesn’t pop up correctly,

recheck and adjust the alignment of latch with the

markings.

2. Disengage the latch cable and take out latch.

1. Remove two bolts securing latch to the body.

HOOD LATCH

Removal

NOTE :

Before removing mounting bolts of latch, do the

markings on body so that while refitting, the lock

setting of the hood will not change.