NANO

BODY

765

BODY

HOOD, HOOD LATCH, HOOD LATCH

CABLE AND HOOD STRIKER

HOOD

Removal

NOTE :

Before removing mounting screws of hood, do the

markings on hood so that while refitting, the alignment

of the hood will not change.

1. Remove mounting screws securing hood to the

hood hinges.

2. Remove the stay rod from the bracket and take

out the hood.

Installation

1. Locate the hood on the hinges and match the

markings.

2. Tighten four mounting screws of hood to specified

torque.

TIGHTENING TORQUE FOR HOOD SCREWS= 1 Kg-m

NOTE :

Ensure that there is a uniform gap between the hood

and body. If not so, recheck and adjust the alignment

of hood with the markings.