294 / 745
6F33 TRANSAXLE
26
10. AUTO TRANSAXLE FLUID CHECK AND CHANGE INTERVAL
AUTO TRANSAXLE FLUID CHECK AND CHANGE INTERVAL
T/M
Lubricant to be used at AT
maker / Vehicle maker /
Dealer / Garage (Repair
shop )
Check
&
Replenishment
Change
Private Use
Commercial
Normal use
Severe
use*
6F33
Hyundai Transys Genuine
ATF SP-IV M1 Equivalent
(SK, S-OIL or Michang ATF
SP-IV M1 Equivalent)
No Check**
No
Service
Required
Every 100,000 km
Every 90,000 km
1. Severe usage (marked *) is defined as,
a. driving in rough road ( bumpy road, gravel
road, snowy road, unpaved road & etc.)
b. driving on mountain road (ascent/descent)
c. repetition of short distance driving
d. more than 50% operation in heavy city
traffic during hot weather above 30
℃
e. police, taxi, commercial type operation or
trailer towing, etc.
2. Method of Oil level check ( marked ** )
Basically, 6F33 Auto Transaxle Fluid oil level
check is “No check”
(Precondition: Same as 6F33 Auto Transaxle
factory delivery condition)
3. If you have any problem, please visit or call
authorized official dealer of TATA Motors Ltd.
CAUTION
Prohibit the 6F33 ATF oil level check by general
driver, unauthorized dealer or maintainability
factory.
Because ATF oil level check process is required
to disassemble or assemble the Auto T/M inner
parts (Overhaul)
And do not fill the MTF (Manual Transaxle Fluid
) and unsuitable ATF ( such as Dextonor other
company ATF for example AISIN AW, JATCO,
GM, FORD, ZF, MMC, DSI, BTR, etc.)
ATF OIL LEVEL CHECK METHOD (DRAIN PLUG,
GASKETS, ETC)
NOTES
1. In transmission assembly bench test. Check
fluid level according to right procedure before
test.
2. When checking fluid level, be careful not to
enter dust, foreign matters, etc. from fill hole.
3. To drain fluid completely, remove drain plugs.