1915 / 4910
Vehicle Platform: Tiago,Tigor & Osprey
ECU Name: Hella Body Control Module (BCM)
DTC Troubleshooting Data
Version: 2.0
Date: 22-10-2018
Author: Parag K
Page: 572 of 737
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B2213 - 11: Front Wiper Park Position Signal - Circuit Short to Ground
Overview:
ISO Code (DTC Code)
B2213 - 11
Customer Symptom
Front and rear wash/wipe may not function correctly
Fault Effects (On Vehicle)
Front and rear wash/wipe may not function correctly
Lamp Status (If Any)
NA
Fault Detection Condition
This fault will be logged after the input switch test routine
execution. User has to operate the switch manually during
routine. If short to ground fault is detected for Front wiper park
position signal then this DTC code will be returned with the
Routine results.
Normal Operating Condition
There should not be any fault returned by routine
Probable Trouble Area
1. BCM connector Fault
2. Cockpit wiring harness short to ground
3. BCM ECU fault
Healing Condition
1. Ignition OFF
ON
2. Clear DTC Command
Component Details:
Front wiper Park Position Signal part of front wiper motor and interfaced to the BCM as a feedback input. If the
IGN is on and if user put the combi switch to front wiper on position, front wiper park position signal gives a
feedback to BCM about the in park and out of park of the front wiper.
Preliminary Checks:
1.
Check Battery Voltage (9V-16V)
2.
Check ECU pins for oxidation, bending & damage.
Trouble Shooting:-