HEXA

HVAC

D ERASING ACTIVE FAULTS

To erase the faults press and hold the recirculation

button for 5 seconds or more. After all the active

faults are erased, the A/C LED will turn OFF during

diagnostic mode. If there are active faults in the sys-

tem, the A/C LED will switch OFF and back ON

instantaneously.

NOTE

There shall be no response / feedback from the sys-

tem, when an attempt is made to erase the faults

when there are no faults in the system.

E EXITING DIAGNOSTIC MODE

To come out of the diagnostic mode either turn OFF

the IGN or turn the blower knob to ON. The rear

defog lamp will turn OFF to indicate exiting the diag-

nostic mode.