863 / 1575
ELECTRICAL
43
ELECTRICAL
CONDITION
POSSIBLE CAUSE
CORRECTION/REFERENCE ITEM
7.STOP LAMP
1. 6 pole connector from floor W/H to
Rear Cluster Lamp loose.
1. Fix the connector properly.
Single stop lamp not
working
2. Bulb loose/fused.
2. Fix the bulb properly. Replace bulb
if blown.
1. Single lamp fuse (
10A
) cabin fuse box
loose/blown.
1. Fix the fuse properly in the base. If
blown replace the fuse.
2. Connector (
6 pole
) loose.
2. Fix the connector properly.
Both stop lamps not
working
3. Brake lamp switch setting is not
proper /switch faulty.
3. Adjust the switch setting / replace
switch if faulty.
8.REAR FOG LAMP
1. 3 pole connector loose.
1. Fix the connector properly.
Single lamp not working
2. Bulb loose/fused.
2. Fix the bulb properly. Replace bulb
if blown.
1. Bulb loose/fused.
1. Fix the bulb properly. Replace bulb
if blown
Rear fog lamp switch
symbol not lighting
2. Rear fog lamp relay faulty.
2. Replace relay
1. BCM connector loose.
1. Fix the connector properly.
2. Rear fog lamp relay faulty.
2. Replace relay.
3. Bulb blown.
3. Replace bulb.
4. Rear fog lamp 3 pole connector loose. 4. Fix the connector properly.
Both rear fog lamps not
working
5. Fuse blown/ short circuit W/H.
5. Replace the fuse/Repair W/H.
9.REGISTRATION PLATE LAMPS
1. Lamp connector loose
1. Fix the connector properly
2. Bulb blown
2. Replace bulb
Single registration plate
lamp not working
3. Parking lamp fuse (
10A
) in cockpit
fuse and relay box loose/blown.
3. Fix the fuse properly in the base. If
blown then replace the fuse.
Both registration plate
lamp not working
1. Master light switch faulty
1. Replace master light switch
10.SIDE REPEATER LAMPS
1. Connectors (
8 pole
) at the lamps
loose.
1. Fix the connector properly.
2. LED's Blown.
2. Replace ORVM.
3. BCM o/p wire loose/short to ground. 3. Repair the wiring harness.
Side repeater lamps on
ORVM not working
4. Combi switch faulty.
4. Replace combi switch.