862 / 1575
ELECTRICAL
42
CONDITION
POSSIBLE CAUSE
CORRECTION/REFERENCE ITEM
4.FRONT PARKING LAMPS
1. Connector (
10 pole
) loose.
1. Fix the connector properly.
2. Bulb loose/fused.
2. Fix the bulb properly. Replace bulb
if blown.
3. Parking lamp LH/RH fuse (
10A
) in
cockpit fuse and relay box
loose/blown.
3. Fix the fuse properly in the base. If
blown, check for short in the circuit
and then replace the fuse..
Single front parking
lamp not working
4. Battery supply not reaching to parking
lamp LH/RH fuse input.
4. Check the continuity from battery
to the lamps through the master
light switch, main W/H and Floor
W/H connectors and rectify the
discontinuity in the circuit
1. Master light switch connector loose.
1. Fix the connector properly.
2. Master light switch faulty.
2. Replace master light switch.
3. BCM output wire loose.
3. Repair the wiring harness.
4. Parking lamp relay faulty.
4. Replace relay.
Both front parking lamps
not working
5. Both Head Lamps connectors loose
5. Fix the connectors properly.
5.REAR PARKING LAMPS
1. Parking lamp LH/RH fuse (
10A
) in
cabin fuse box loose/blown.
1. Fix the fuse properly in the base. If
blown, check for short circuit in the
circuit and then replace the fuse.
2. 6 pole connector from floor W/H to
Rear Cluster Lamp loose
2. Fix the connector properly
3. Bulb loose/fused.
3. Fix the bulb properly. Replace bulb
if blown.
Single rear parking lamp
not working
4. Battery supply not reaching to parking
lamp LH/RH fuse input.
4. Check the continuity from battery
to the lamps through the master
light switch, main W/H and Floor
W/H connectors and rectify the
discontinuity in the circuit.
1. Master light switch connector loose.
1. Fix the connector properly.
2. Master light switch faulty
2. Replace master light switch.
3. BCM o/p open or short circuit.
3. Repair wiring harness.
Both rear parking lamps
not working
4. Parking lamp relay faulty.
4. Replace relay.
6.REAR TURN SIGNAL LAMPS
1. Connector (
6 pole
) loose.
1. 1. Fix the connector properly.
Rear right/left turn signal
lamps not working
2. Bulb loose/fused.
2. Fix the bulb properly. Replace bulb
if blown.
1. BCM output open or short circuit.
1. Repair wiring harness.
2. Combi switch faulty.
2. Replace combi-switch.
No indicator lamp is
working
3. Connector (
6 pole
) loose..
3. Fix the connector properly.