Background Image
Table of Contents Table of Contents
Previous Page  1293 / 1575 Next Page
Information
Show Menu
Previous Page 1293 / 1575 Next Page
Page Background

STORME 400NM

SR

NO

DTC

FTB

DESCRIPTION

CAUSES

EFFECT ON VEHICLE

CHECK

POINTS

CORRECTIVE ACTION

MIL

STATUS

CEL

129

P0604

44

Data Memory Failure

This DTC gets logged due to EMS ECU

Internal RAM failure

EMS ECU takes following recovery

actions:~

1.

Disables the BRC reading and use

estimation for injector pulse

duration instead of reading for inj0

2.

Disables the BRC reading and use

estimation for injector pulse

duration instead of reading for inj1

3.

Disables the BRC reading and use

estimation for injector pulse

duration instead of reading for inj2

4.

Disables the BRC reading and use

estimation for injector pulse

duration instead of reading for inj3

5.

Disables Pilot & Post injection.

6.

Disables RVD on injector cylinder1

7.

Disables RVD on injector cylinder2

8.

Disables RVD on injector cylinder3

9.

Disables RVD on injector cylinder4

10.

Freeze IMV current trim faults.

11.

Increase idle target.

12.

Disables cylinder balance

correction, diagnostics and tooth

learning strategy.

13.

Applies specific idle target for limp

home.

14.

Disables PWC strategy (Pilot main

waves compensation).

15.

Disables SPC (Speed Pilot

Control) strategy, no more SPC

(Speed Pilot Control) trim update.

1.

Check for any physical damage of EMS ECU pins, if found then

replace EMS ECU.

2.

Check for proper ground connection of EMS ECU, if any issue

is found then rectify wiring harness connection.

3.

Check whether the software flashed in the vehicle is latest one

or not; Reflash the EMS ECU with the latest software.

4.

Replace the ES ECU if problem still persists.

OFF

ON

130

P060B

49

Internal electronic failure

This DTC gets logged due to the failure

in Analog digital converter of EMS ECU.

1.

Check for any physical damage of EMS ECU pins, if found then

replace EMS ECU.

2.

Check for proper ground connection of EMS ECU, if any issue

is found then rectify wiring harness connection.

3.

Check whether the software flashed in the vehicle is latest one

or not; Reflash the EMS ECU with the latest software.

4.

Replace the EMS ECU if problem still persists.

ON

OFF