1292 / 1575
SAFARI 400NM
SR
NO
DTC
FTB
DESCRIPTION
CAUSES
EFFECT ON VEHICLE
CHECK
POINTS
CORRECTIVE ACTION
MIL
STATUS
CEL
125
P0601
41
General Checksum Failure
This fault gets logged due to EMS ECU
Internal control module General
checksum failure
EMS ECU activates urgent engine
stop request and power latch request
by EMS ECU.
1.
Check for any physical damage of EMS ECU pins, if found then
replace EMS ECU.
2.
Check for proper ground connection of EMS ECU, if any issue
is found then rectify wiring harness connection.
3.
Check whether the software flashed in the vehicle is latest one
or not; Reflash the EMS ECU with the latest software.
4.
Replace the EMS ECU if problem still persists.
OFF
ON
126
P0601
44
Data Memory Failure
This fault gets logged due to EMS ECU
Internal control module data memory
failure
EMS ECU activates urgent engine
stop request and power latch request
by EMS ECU.
1.
Check for any physical damage of EMS ECU pins, if found then
replace EMS ECU.
2.
Check for proper ground connection of EMS ECU, if any issue
is found then rectify wiring harness connection.
3.
Check whether the software flashed in the vehicle is latest one
or not; Reflash the EMS ECU with the latest software.
4.
Replace the EMS ECU if problem still persists.
OFF
ON
127
P0601
45
Program Memory Failure
This fault gets logged due to EMS ECU
Internal control module program
memory failure
EMS ECU activates urgent engine
stop request and power latch request
by EMS ECU.
1.
Check for any physical damage of EMS ECU pins, if found then
replace EMS ECU.
2.
Check for proper ground connection of EMS ECU, if any issue
is found then rectify wiring harness connection.
3.
Check whether the software flashed in the vehicle is latest one
or not; Reflash the EMS ECU with the latest software.
4.
Replace the EMS ECU if problem still persists.
OFF
ON
128
P0604
42
General memory failure
This fault gets logged due to EMS ECU
Internal control module RAM failure
EMS ECU activates urgent engine
stop request and power latch request
by EMS ECU.
1.
Check for any physical damage of EMS ECU pins, if found then
replace EMS ECU.
2.
Check for proper ground connection of EMS ECU, if any issue
is found then rectify wiring harness connection.
3.
Check whether the software flashed in the vehicle is latest one
or not; Reflash the EMS ECU with the latest software.
4.
Replace the EMS ECU if problem still persists.
OFF
ON