ENGINE 1.3L QUADRAJET (90PS)
81
(iii) If pressure does not rise, replace fuel pump or
check for leakages.
g. After checking fuel pressure, remove fuel pressure
gauge.
h. Connect fuel delivery connector to fuel pump nipple
and ensure that quick fix couplings are properly
fitted.
i. With engine OFF and ignition ON check for fuel
leakage.
C. FUEL LEVEL SENSOR
Fuel level sensor assembly consists of major parts
as TFR Holder assembly and Float Arm Assembly.
Fuel level sensor wiring harness is connected to
module connector (under themodule cover). Fuel level
sensor assembly provides the signal to indicate the
fuel level in the tank. As the float arm assembly moves
w.r.to the fuel level in tank, resistance at sensor
harness varies accordingly.
REMOVAL:
1. Disconnect battery.
2. Remove fuel module assembly from vehicle.
(Refer Fuel module removal procedure).
3. Disconnect electrical connector of fuel level
sensor.
4. Pry out two locks (using suitable tool) located at
either end of fuel level sensor.
NOTE:
Please note that level sensor holder has the
snaps on both sides. Enough care need to be taken
to avoid damages to the snaps onmodule and level
sensor
5. Remove fuel level sensor.
