3290 / 4910
Vehicle Platform: OSPREY / AMP
ECU Name: PEPS
DTC Troubleshooting Data
Version: 1.2
Date: 29 Mar 2017
Author:
Rajasekhara Reddy
Page: 8 of 369
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
Generic DTCs Diagnostic DTCs
U3006 - 16:-Control Module Input Power "A" - circuit voltage below threshold
Overview:-
ISO Code
U3006-16
Customer Symptom
PEPS will probably not function or will function intermittently or
partially
Fault Effects (On Vehicle)
Cannot determine scope without knowledge of power line
applicability
Lamp Status (If Any)
None
Fault Detection Condition
If Battery(supply) voltage goes below 11.5V
If Alternator is not charging the battery and alternator voltage is
less than 13.5V or 0V.
Normal Operating Condition
Normal operating range:-
ECU will be awake from 6V to 16 V.
Full assistance is b/w 11.5 to 16 volts.
Reduced assistance is b/w 9 to 11.5 V
Probable Trouble Area
Low battery
Healing Condition
N/A
Table 1:- U3006-16 overview details
Component Details:-
N/A
Preliminary Checks:-
1. Voltage at the battery terminals should be greater than 11.5V.
2. PEPS power supply connector should have greater than 11.5V for full assistance.
3. Check battery cable and PEPS connector terminals for damage.
4. Check PEPS ECU for pin bend/damage.
5. Alternator output voltage should be between 13.5 V to 14.5 V in engine running condition.