252 / 948
STEERING
19
vii. POWER STEERING OIL FLUSHING
PROCEDURE :
NOTE:
Always use fresh Power Steering oil, for flushing.
In case of non availability of sufficient quantity of
fresh Power Steering oil, the drained oil may be
used after filtering (use filter paper – Size: 10
microns).
1. Minimum quantity of oil required is 2 liters (If
the filtered oil quantity is less add fresh oil)
2. Drain the oil from the system. (For procedure
refer power steering oil replacement
procedure.)
3. Fit new filter assembly and fill the system with
fresh / filtered oil. (For procedure refer
steering
reservoir
filter
replacement
procedure.)
4. Start the engine and allow it to run for few
minutes. With the engine idling, steer the
wheels from RH lock to LH lock at least 10
times. Ensure oil level does not drop below
the suction fitting in the reservoir.
5. Stop the engine and drain the oil from the
system.
NOTE:
Remove the filter cartridge used while flushing
in step 3. Store it separately (it can be used
again for flushing other vehicle).
After flushing always use a new filter.