1358 / 1863
ELECTRICAL
56
No indicator lamp is
working
1. BCM o/p open or short circuit.
1. Repair wiring harness.
2. Combi switch faulty.
2. Replace combi-switch.
3. Connector at combi switch loose.
3. Fix the connector properly.
CONDITION
POSSIBLE CAUSE
CORRECTION/REFERENCE ITEM
7.STOP LAMP
Inboard Stop lamp
(RH / LH) not working
1. Grounding point loose.
1. Tighten the grounding properly
including the Tail gate ground.
2. Interconnection loose at- in floor to Tail
gate pigtail and tailgate pigtail to tail gate
harness.
2. Fix the connector properly.
3. Bulb loose/fused.
3. Fix the bulb properly. Replace bulb
if blown.
Outboard Stop lamp
(RH / LH) not working
1. Grounding point loose.
1. Tighten the grounding properly
including the Tail gate ground.
2. Interconnection loose at- in floor to Tail
gate pigtail and tailgate pigtail to tail gate
harness.
2. Fix the connector properly.
3. Bulb loose/fused.
3. Fix the bulb properly. Replace bulb
if blown.
Both stop lamps not
working
1. Single lamp fuse cabin fuse box
loose/blown.
1. Fix the fuse properly in the base. If
blown replace the fuse.
2. Connector from main W/H to floor W/H
loose.
2. Fix the connector properly.
3. Brake lamp switch setting is not proper
/switch faulty.
3. Adjust the switch setting / replace
switch if faulty.
8.REAR FOG LAMP
Single lamp not
working
1. Grounding point loose.
1. Tighten grounding properly.
2. Connector loose.
2. Fix the connector properly.
3. Bulb loose/fused.
3. Fix the bulb properly. Replace bulb
if blown.
Rear fog lamp switch
symbol not lighting
1. Bulb loose/fused.
1. Fix the bulb properly. Replace bulb
if blown
2. Rear fog lamp relay faulty.
2. Replace relay
Rear fog lamps not
working
1. Check Telltale in IC, if working then
check bulb or harness
1. Check BCM connections and fix
the connector properly.
2. Rear fog lamp relay faulty.
2. Replace relay.
3. Bulb blown.
3. Replace bulb.
4. Rear fog lamp connector loose.
4. Fix the connector properly.
5. Fuse blown/ short circuit W/H.
5. Replace the fuse/Repair W/H.
9.REGISTRATION PLATE LAMPS
Single registration
plate lamp not
working
1. Grounding point loose
1. Tighten grounding properly
2. Lamp connector loose
2. Fix the connector properly
3. LED not working
3. Replace RPL
Both registration
plate lamp not
working
Master light switch faulty
Replace master light switch