83 / 1236
ENGINE
51
38.Remove the bearing frame by loosening the
mounting bolts in proper sequence.
(Loosen the
bolts from outer to inner side)
39.Remove the intake and exhaust camshafts.
40.Unscrew and remove cylinder head mounting
bolts in proper sequence.
(Loosen the bolts from
outer to inner side)
41.Slightly lift the cylinder head to clear locating hol-
low dowel in crankcase & place it on table with
care.
NOTE
Take proper care while placing cylinder head on the
table to avoid damage to the cylinder head surface,
valves & glow plugs.
42.Remove the cylinder head gasket.