ELECTRICAL
103
vehicle is moving.
The indication on the display may be delayed if fuel
consumption is affected by driving pattern.
You can change the INST FE unit as km/l or Miles
per Gallon (MPG UK) using SET and MODE
buttons.
‘MPG’ is applicable for Export variant only.
For km/l setting, the indicated maximum value of
INST FE is 30 km/l. No more than 30 will be
indicated on the display even if the actual INST FE
is higher than 30 km/l.
For MPG setting, the indicated maximum value of
INST FE is 80 MPG. No more than 80 will be
indicated on the display even if the actual INST FE
is higher than 80 MPG.
6
Clock
Indicates current time in 12 Hrs mode.
Note: You can change the clock time using SET
and MODE buttons.
Whenever the battery terminals or related fuses are
is connected you must reset the clock time. This
feature is available when ignition switch is in ON
position.
7
Outside Ambient
Temperature
Displays outside ambient temperature in units °C or
°F.
This value may differ from the actual driving
distance available.
Resolution: 1 °C or °F
Note:
You can change the Temperature unit using SET
and MODE buttons.
°F is applicable for Export variant only.
The outside ambient temperature is not the actual
outside temperature when driving at low speed or
when stopped.
If display shows ‘- - ‘, take your car to a TATA
authorized service Centre.
8
Service reminder
Indicates the number of days or kilometers
remaining for next service at every ignition ON for
few seconds if service is due.
If service is overdue, DIS will display 0 km or 0
days and spanner symbol will blink at every ignition
ON for few seconds.
DIS will indicate Spanner symbol as continuously
ON when service is overdue.