1406 / 1428
GENERAL
6
TAIL GATE STRIKER
NOTE:
Before removing mounting screws of the tailgate
striker, do the markings on striker so that while refit-
ting, the alignment of the tailgate will not change.
1. Remove two screws with the help of Allen key
and take the tailgate striker out.
Re-fitment of Striker:
1. Align tailgate striker with the marking and
tighten two screws with Allen key.
2. Do Not Fit Striker in Reverse Direction
GAS BALANCER ROD
1. Remove two c-clips provided on each side of
balance rod with the help of screw driver. Pull
out gas balancer rod from tailgate
NOTE:
Ensure tailgate is properly supported before bal-
ance rods are removed.
Before mounting balancer rod on tailgate, apply
some grease at the end of balancer rod. Insert bal-
ancer rod ends into ball points provided on tailgate.
Insert c-clip inside balance rod at each end to lock
the balancer rods in its place.