1253 / 1428
FUEL SYSTEM
22
FITMENT OF CNG RECEPTACLE VALVE (On
vehicle):
For fitment procedure follow the Reverse
procedure of ‘Removal’
Ensure fitment of receptacle cap on receptacle.
Installation of “O” Ring:
Open
the Filler Valve CAP manually.
Extract / remove the “O” Ring from
the neck of
the filler valve.
Using Nose pliers extract the circlip.
Replace Wire Mesh filter with the New wire
Mesh filter.
Place the circlip using nose pliers.
Apply siliconic oil (Loxeal 1000) on new O‐ring
before replacing.
NOTE:
Do not apply tar, paint, grease or any other
material inside the receptacle as this could
impair performance of the Receptacle valve.
During service always insure the manual shut–
off valve of cylinder valve is closed & the vehicle
is parked in well ventilated area.