NANO

DRIVETRAIN

401

DRIVETRAIN

12. Place the oil collector in the rear cover, such that

the groove in the rear cover aligns with the groove

in the oil collector. Make sure that the fit is not

loose.

13. Apply liquid sealant and place the rear cover and

tighten the bolts to a torque of 2.1 ~2.5 Kgm.

14. Smear the interlock pin with grease and place it

in its slot. (Grease is applied to hold it in the

slot.)

15. Apply the sealant and place the top cover on the

rear half housing.

16. Tighten the M 8 bolts to a torque of 2.1 ~ 2.5

Kgm.