1178 / 1575
SAFARI STROME
SR
NO
DTC
DESCRIPTION RESOLVE
PRIORITY
EFFECT ON VEHCLE
CAUSES
CHECK POINTS
CORRECTIVE ACTION
CEL
MIL
STATUS
119
P1216
Current too high
on bank 2.
Engine vibration / restricted Fly-up.
Current too high on bank 2.
1. Check Injector
connections for Open or
short circuit.
2. Disconnect injectors and
key on. If problem still
present check wiring harness
connections.
3. Check ECU.
1. Disconnect and key on. If fault disappears; clear
faults and reconnect injectors one by one. If fault
reappears; replace the corresponding injector.
Complete the process for all the injectors.
2. Follow Injector check and rectification procedure.
Y
N
120
P1220
Pedal sensor
track 2 -
electrical VEXT.
NO.
Electrical reference voltage
fault on Pedal sensor track
2.
1. Check for Reference
voltage 1 fault or If P1120 is
present.
2. Check sensor connections
for rust dirt etc.
3. Check Intermediate
connector.
4. Visually check sensor.
5. Check Electrical continuity.
6. Check ECU.
1. Follow Reference voltage 1 check and
rectification Procedure.
2. Clean the sensor connections and ensure proper
fitment.
3. Remove Intermediate connector between EMS
harness and vehicle wiring harness. Check for
terminal back out. Do necessary repairs reconnect
and check the fault.
4. Replace sensor if damaged.
5. Follow Electrical continuity check procedure.
Replace/ Rectify Harness if required.
6. Replace ECU; if problem still persists.
N
N
121
P1223
Pedal sensor
fault (correlation
between track 1
and 2).
NO
Accelerator Pedal sensor -
track 1 and 2 correlation
(2>1).
Check faults P0120; P0122;
P0123; P0222; P0223.
Rectify the concerned faults.
Y
N
122
P1235
Manifold
pressure sensor
fault electrical.
Incorrect VGT behavior.
TMAP sensor high
electrical signal.
1. Check for Reference
voltage 1 fault or If P1105 is
present.
2. Check inlet air circuit for
clogging; wrong
assembly/fitment etc.
3. Check sensor connections
for rust dirt etc.
4. Visually check sensor.
5. Check Electrical continuity.
6. Check ECU.
1. Follow Reference voltage 1 check and
rectification Procedure.
2. Ensure proper fitment of the inlet air circuit.
3. Clean the sensor connections and ensure proper
fitment.
4. Replace sensor if damaged.
5. Follow Electrical continuity check procedure.
Replace/ Rectify Harness if required.
6. Replace ECU; if problem still persists.
N
Y
123
P1236
Manifold
pressure sensor
fault electrical.
Incorrect VGT behavior.
TMAP sensor reference
voltage fault.
1. Check for Reference
voltage 1 fault or If P1105 is
present.
2. Check inlet air circuit for
clogging; wrong
assembly/fitment etc.
3. Check sensor connections
for rust dirt etc.
4. Visually check sensor.
5. Check Electrical continuity.
6. Check ECU.
1. Follow Reference voltage 1 check and
rectification Procedure.
2. Ensure proper fitment of the inlet air circuit.
3. Clean the sensor connections and ensure proper
fitment.
4. Replace sensor if damaged.
5. Follow Electrical continuity check procedure.
Replace/ Rectify Harness if required.
6. Replace ECU; if problem still persists.
N
Y