HEXA

TRANSMISSION 26 18. Loosen the oil cooler line screw by using a H12 wrench. 19. Remove the oil cooler lines. CAUTION: The automatic transmission fluid may flow out the holes. Put a container under transmission cooler holes. 20. Remove and discard the cooler line O-rings. 21. Put a container under the cooler lines and flush the transmission cooling circuit. 22. Loosen the 2 drive flange screws by using a H16 wrench. 23. Using a H9 wrench, turn the selector shaft out of park to allow propeller shaft turning and access to the other drive flange screws.