HEXA

TRANSMISSION 25 10. Repeat operation for each of the 6 screws and discard the screws. 11. Before removing the last bolt, push it slightly to loose converter from flex plate and to move converter backward in transmission. 12. Loosen and remove the Hexagonal M8 screw of anchoring bracket. NOTE: Make sure Gear shifter lever which is fitted in driver cabin is in park mode by shifting lever towards front of vehicle. 13. Properly locate the fixture plate (Part No: 2870 5890 26 21) in removed hexagonal M8 screw of anchoring bracket hole and gear shift lever assembly with Across Flat area of pivot pin as shown below. Then again insert the M8 screw and give 2kgfm of torque. 14. Release the torque of Hexagonal M12 thin nut of Pivot pin. WARNING: Do not bend the shift cable when opening the shift linkage adjustment nut. 15. Loosen the shifter cable nut and remove cable string from anchoring bracket slot. Precaution to be taken while removing the shifter cable not to damage the rubber components. 16. Disconnect the vehicle connector. 17. Remove the speed-sensor connector on converter housing.