HEXA

TRANSMISSION 24 Rear Wheel Drive Transmission Removing Procedure: 1. Place the Vehicle on the hoist, Apply the hand brake.  Transmission Selector in Park Position –P  Ignition “OFF” 2. Lift the vehicle to access to the transmission. 3. Remove the main transmission protection. 4. Loosen the 2 bolts at the middle and the 3 bolts at the rear of the exhaust system by using a H12 wrench, and remove the middle exhaust system. 5. Loosen the 2 bolts at the front of the catalyst by using a H12 wrench and remove the catalyst. 6. Loosen the screws and remove the vent tube system. 7. Loosen the 3 starter motor screws by using an H14 wrench and remove the starter motor. 8. Turn the crank pulley using a H19 wrench CLOCKWISE ONLY until the first screw is visible in starter hole. 9. Loosen the screw by using a H14 wrench.