HEXA

TRANSMISSION 23  Nominal level: condition if oil is dripping at 40°C (+/-2°C).  Minimum level: condition if oil is dripping at 50°C (+/-2°C). NOTICE: Inspect the fluid color. The fluid should be red or dark brown. Fluid that is very dark or black and has a burnt odor usually indicates contamination or overheating. 10. Replace the trans oil level plug and tighten to 25 Nm. 11. Inspect for external leaks. See Oil Leakage Location. 12. Install the transmission protection. 13. Slowly lower the vehicle. ESD (Electrostatic Discharge) Notice: Electrical components which are particularly sensitive to electrostatic discharge (electronic control units, sensors, etc.) are identified with the ESD warning symbol in the repair procedure. E - Electro S - Static D - Discharge Statically charged persons can discharge themselves when they touch electrical components. When electronic components are being exchanged, particular attention must be paid to electrostatic discharge (ESD). If safety regulations are disregarded, other electronic components in the vehicle could also be damaged. To avoid damaging or destroying electrical components as a result of electrostatic discharge, it is absolutely essential to observe the following Instructions: When replacing electrical components, leave the replacement components in their original packaging until immediately before they are to be installed. Do not touch pins and multi-pin connectors directly! Touch electrical components by their housings only. If necessary, always return a removed component in its original packaging (always pack the component away immediately). Personal protective equipment: Antistatic shoes, ESD Gloves According Legal International Electro Technical Commission standard IEC 613340-5-1 & IEC 613340-5-2.