HEXA

REAR AXLE 22 b. Press (Part No. 289458903519) 5. Identify shims and side bearings on both sides. The shims are not interchangeable during assembly. NOTE If shims are damaged, replace with new shims during assembly. 6. Reposition case in press (Part no. 289458903519) and remove side bearing cone on the other side in same manner. NOTE It is always preferred to replace side bearings once pulled out. But one can confirm free rolling of bearings and reuse it, if they are defect free. 7. Open lock strap strips with help of punch and remove ring gear screws. Remove ring gear. 8. If required tap ring gear with a mallet to free it from case. NOTE Discard ring gear screws and replace with new ones. 9. Clamp anyone (LH/RH) of axle shafts in vice firmly. CAUTION Vice jaws should not locate on axle splines or any machined surfaces. 10.Install differential case on axle shaft.