795 / 1003
FATC
16
The display will no longer show the climate control
option when panel is OFF.
viii. AUTO ON SELECTION BUTTON
In the AUTO mode all the configurable parameters
will be selected automatically except temperature
selection
To put the automatic climate control in fully
automatic mode:
a. Set the desired temperature by turning
temperature control knob.
b. Press the ‘AUTO’ button.
c. The system automatically selects the proper mix of
conditioned and/or heated air that will, as quickly
as possible, raise or lowers the interior
temperature to your preference.
d. When you set the temperature to its lower limit
(Lo) or its upper limit (Hi), the system runs at full
cooling or heating only. It does not regulate the
interior temperature.
NOTE:
In 'AUTO' mode, the FATC system will regulate the
blower speed automatically.
ix. TEMPERATURE CONTROL KNOB
Turning the temperature control knob clockwise
increases the temperature of the air. Steps of 0.5 º
C. will increase the desired temperature. User can
select temperature range from 18ºC to 30ºC.
Whereas the anti-clockwise direction decreases.
The desired temperature selected by the user shall
be updated in the display simultaneously as per the
rotation of the knob.
When you set the temperature to its lower limit (Lo)
or its upper limit (Hi), the system performs to provide
full cooling or heating respectively. It does not
regulate the interior temperature