3578 / 4910
Vehicle Platform: OSPREY / AMP
ECU Name: PEPS
DTC Troubleshooting Data
Version: 1.2
Date: 29 Mar 2017
Author:
Rajasekhara Reddy
Page: 296 of 369
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B1032–62 :-ESCL Lock Unlock Failure - Signal Component Failure
Overview:-
ISO Code (DTC Code)
B1032-62
Customer Symptom
On cranking the vehicle Engine is not starting
Fault Effects (On Vehicle)
On cranking the vehicle Engine will not start
Lamp Status (If Any)
-.
Fault Detection Condition
If PEPS ECU receives both CAN signals 'LockStateESCL' &
'UnlockStateESCL' from ECSL with same value '0' or '1' for
1000ms, PEPS logs this DTC.
Normal Operating Condition
On cranking the vehicle engine shall start seamlessly.
Probable Trouble Area
1. PEPS ECU
2. ESCL ECU
Healing Condition
Ignition Transition:- IGN OFF
ACC ON/ CRANK
On ACC ON after ESCL key authentication request, no DTC is
logged by PEPS.
Table 63:- B1032 - 62 overview details
Component Details:-
1. PEPS ECU
2. ESCL ECU
Preliminary Checks:-
1. After pressing start stop switch, check whether vehicle is getting cranked.