2825 / 4910
Vehicle Platform: OSPREY
ECU Name: Hella Body Control Module (BCM) DTC
Troubleshooting Data
Version: 1.4
Date: 15 May 2018
Author: Body CoC
Page: 745 of 855
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B223C-11: Rear Wiper Fixed Interval Signal - circuit short to ground
ISO Code (DTC Code)
B223C-11
Customer Symptom
Rear wiper operates at fixed speed only
Fault Effects (On Vehicle)
Rear wiper operates at fixed speed only.
Lamp Status (If Any)
NA
Fault Detection Condition
This fault will be logged after the input switch test routine
execution. User has to operate the switch manually during
routine. If short to ground circuit fault is detected for Rear
Wiper Fixed Interval Signal then this DTC code will be
returned with the Routine results.
Normal Operating Condition
There should not be any fault returned by routine.
Probable Trouble Area
1. BCM connector Fault.
2. Harness issue.
3. Switch fault.
4. ECU fault.
Healing Condition
1. Give ignition cycle after fault removal
2. Clear DTC command- No DTC logged
Component Details:
Rear wiper operates in fixed interval mode when this switch is activated.
Preliminary Checks:
1.
Check Battery Voltage (9V-16V)
2.
Check ECU pins for oxidation, bending & damage.