2705 / 4910
Vehicle Platform: OSPREY
ECU Name: Hella Body Control Module (BCM) DTC
Troubleshooting Data
Version: 1.4
Date: 15 May 2018
Author: Body CoC
Page: 625 of 855
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B2215- 1C: Front Wiper Variable Speed Switch voltage out of range
Overview:
ISO Code (DTC Code)
B2215-1C
Customer Symptom
User will not get variable speed functionality when wiper
is kept at INT position.
Fault Effects (On Vehicle)
Wiper wipes with 9 sec delay irrespective of the delay
position selected.
Lamp Status (If Any)
NA
Fault Detection Condition
DTC is logged during input switch test routine.
Normal Operating Condition
No DTC logged during the input switch test routine.
Probable Trouble Area
1. Combi Switch damaged
2. Wiring harness short to GND/ OPEN
3. BCM fault
4. BCM connector fault
Healing Condition
Run the input switch test routine and read th DTC. The
DTC B2215-1C shall not be logged.
Component Details:
Front wiper variable speed switch (part of combi switch) is used to set the delay of wiping speed when kept at
INT position. It provides different voltage level values depending on the switch position.
Preliminary Checks:
1. Check Battery Voltage (9V-16V)
2. Check ECU pins for oxidation, bending & damage.
Trouble Shooting:-