2648 / 4910
Vehicle Platform: OSPREY
ECU Name: Hella Body Control Module (BCM) DTC
Troubleshooting Data
Version: 1.4
Date: 15 May 2018
Author: Body CoC
Page: 568 of 855
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B223E - 11: Rear Wiper Park Position Signal - Circuit Short to Ground
Overview:
ISO Code (DTC Code)
B223E - 11
Customer Symptom
Rear wash/wipe may not function correctly
Fault Effects (On Vehicle)
Rear wash/wipe may not function correctly
Lamp Status (If Any)
NA
Fault Detection Condition
This fault will be logged after the input switch test
routine execution. User has to operate the Rear wiper
switch manually during routine. If short to ground fault is
detected for Rear wiper park position signal then this
DTC will be returned with the Routine results.
Normal Operating Condition
There should not be any fault returned by routine
Probable Trouble Area
1. BCM connector Fault
2. Rear wiring harness short to ground
3. BCM ECU fault
Healing Condition
1. Ignition OFF
ON
2. Clear DTC Command
Component Details:
Rear wiper Park Position Signal part of Rear wiper motor and interfaced to the BCM as a feedback
input. If the IGN is on and if user put the combi switch to Rear wiper on position, rear wiper park
position signal gives a feedback to BCM about the in park and out of park of the rear wiper.
Preliminary Checks:
Check Battery Voltage (9V-16V)
Check ECU pins for oxidation, bending & damage.
Trouble Shooting:-