2624 / 4910
Vehicle Platform: OSPREY
ECU Name: Hella Body Control Module (BCM) DTC
Troubleshooting Data
Version: 1.4
Date: 15 May 2018
Author: Body CoC
Page: 544 of 855
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B2211 - 11: Front Wiper Intermittent Switch - Circuit Short to Ground
Overview:
ISO Code (DTC Code)
B2211 - 11
Customer Symptom
Front wiper always ON (Intermittent Mode)
Fault Effects (On Vehicle)
Front wiper always ON(Intermittent Mode)
Lamp Status (If Any)
NA
Fault Detection Condition
This fault will be logged after the input switch test
routine execution. User has to operate the switch
manually during routine. If short to ground fault is
detected for Front wiper intermittent switch then this
DTC will be returned with the Routine results.
Normal Operating Condition
There should not be any fault returned by routine
Probable Trouble Area
1. BCM connector Fault
2. Cockpit wiring harness short to ground
3. Front wiper intermittent switch damaged
4. Combi switch connector fault.
5. BCM ECU fault
Healing Condition
1. Ignition OFF
ON
2. Clear DTC Command
Component Details:
Front wiper Intermittent switch is part of combination stalk switch and interfaced to the BCM. If the IGN
is on and if user put the combi switch to front wiper Intermittent position, front wiper will turn ON in
intermittent mode.
Preliminary Checks:
1. Check Battery Voltage (9V-16V)
2. Check ECU pins for oxidation, bending & damage.
Trouble Shooting:-