2417 / 4910
Vehicle Platform: OSPREY
ECU Name: Hella Body Control Module (BCM) DTC
Troubleshooting Data
Version: 1.4
Date: 15 May 2018
Author: Body CoC
Page: 337 of 855
Copyright ©
TATA MOTORS Ltd.
This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author.
B2253 – 11: Turn Left Indicator Switch Circuit – circuit short to ground
Overview:
ISO Code
B2253 - 11
Customer Symptom
Turn left indication always on
Fault Effects (On Vehicle)
1. Turn left indication always on
2. Battery Drain
Lamp Status (If Any)
Always ON
Fault Detection Condition
This fault will be logged after the input switch test
routine execution. User has to operate the switch
manually during routine. If short to ground fault is
detected for turn left indicator switch then this DTC code
will be returned with the Routine results.
Normal Operating Condition
There should not be any fault returned by routine
Probable Trouble Area
1. BCM connector Fault
2. Turn left indicator switch short to ground from
Cockpit wiring harness
3. Turn indicator switch damaged or stuck
4. Combi switch connector fault.
5. BCM ECU fault
Healing Condition
1. Ignition OFF
ON
2. Clear DTC Command
Component Details:
Turn left indicator switch is part of combi switch. If the IGN is ON and turn left indication is given by user
then turn left indicator lamps will flash with predefined frequency.
Preliminary Checks:
1. Check Battery Voltage (12.5 V & above)
2. Check ECU pins for oxidation, bending & damage.
Trouble Shooting:-